CP2102 - USB Driver
Install and Configuration
Download
USB-Driver-CP2102 Step#1 Download
Visit Silabs site and Download USB Driver for your OS.
Step#2 Extract and Install
Step#3 Connect Hardware to PC's USB Port and Check
Now you can use any software supporting COM ports to connect to this newly created COM port.
System can assign any number to this COM port. Even if you change your USB Port the COM port number will change. If you plug your hardare into same USB Port, the COM port number should remain same.
In case you want to change the system assigned COM port follow below steps.
Optional: Change the system assigned COM port from Device manager.
Start > Run: Type "Device Manager"
You can select COM port number, Even though it is showing in use. Just make sure it does not clash with existing connected COM ports.
